-
(i) Slip on flanges are slipped over the pipe and welded (usually both inside and outside) to provide strength and prevent leakage.
(ii) These slip on can sometimes have a boss or hub, and can be made with a bore to suit either pipe or tube.
(iii) At SWBM Dubai, we supply mild steel slip on flanges with pressure ANSI std CL150, CL 300, CL600, British std PN10, PN16, PN25, Japanese Std JIS 5K, JIS 10K, SABS 1123, T1000/3, Table D, Table E; face FF, RF, RTJ; sizes ranging from 1/2” – 24” .
(iv Sunelwala Dubai is one of the oldest dealers, distributors, stockists & suppliers of Slip on flanges in the Middle east region.”
Description
Material – Mild Steel
Additional information
| Weight | 1 kg |
|---|---|
| Pressure | CL150, CL300, CL600, JIS 5K, JIS 10K, PN10, PN16, PN25, SABS 1123, T1000/3, TABLE D, TABLE E |
| Face | FF, RF, RTJ |
| Sizes | 1/2", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3/4", 3", 4", 5", 6", 8", 10", 12", 14", 16", 18", 20", 24" |
Related products
-
A105 SOCKET-WELD FLANGE
- Select optionsDescription:(i) Socket Weld Flanges use a socket-weld end prep to connect a piece of pipe to the flange.
(ii) The static strength of socket weld flanges is similar to slip-on flanges’, but their fatigue strength is higher due to the presence of a single, instead of double, fillet weld.
(iii) At SWBM Dubai, we are suppliers of carbon steel socket weld flanges with pressure CL150, CL300, CL600, PN16; face FF, RF, RTJ; sizes ranging from 1/2” – 24”, Schedule SCH. 40, SCH. 80, SCH. 160, SCH. XS, SCH. STD
(iv ) Sunelwala Dubai maintains ready stock of Socket weld flanges and supplies them to various countries in the Gulf region.
-
Brass Threaded Flange
- Select optionsDescription:
(i) Threaded Flanges are used in low pressure systems.
(ii) Threaded brass flanges are used in special applications where the flange can be assembled to the piping system without welding.
(iii) At SWBM Dubai, we are stockists and providers of brass threaded flanges with pressure ANSI standard CL150, British standard PN16; face FF, RF; sizes ranging from 1/2” – 6”
(iv) Sunelwala Dubai maintains extensive stock of Brass Threaded Flanges and supplies them to various countries in the Gulf region.
-
Carbon Steel Galvanized Backing Rings
- Select optionsDescription:(i) The backing ring is placed in between the ends of two pipes to secure a joint. It is then welded so that the material is melted and fused with pipes.
(ii) Backing rings are used to hold pipes and fittings together in industries like automotive, construction, and aerospace.
(iii) At Sunelwala, we offer carbon steel backing rings with pressure ANSI std CL150, PN16; face FF; sizes ranging from 1/2” – 24”.
(iv) Looking for international standard top quality carbon steel backing ring in the MENA region, contact us now.
-
SS SLIP-ON FLANGE
- Select optionsDescription:(i) The flange is slipped over the pipe and then welded both inside and outside to provide sufficient strength and prevent leakage.
(ii) This flange is used in preference to weld necks because of its lower cost.
(iii) At SWBM Dubai, we provide stainless steel 316 slip on flanges with pressure CL150 (ANSI std); face FF, RF, RTJ; sizes ranging from 1/2” – 24”
(iv We are one of the most acclaimed traders of stainless steel 316 flanges in the MENA region.
